TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 337 of 772

TM 9-2350-260-20-1-2

PERSONNEL HEATER FUEL PUMP REPLACEMENT (Sheet 2 of 3)

4.

Using 5/8 inch wrench, loosen nut (E).

5.

Disconnect hose (F) from elbow.

6.

Using socket, loosen two screws (G), while holding

nuts (H) with 7/16 inch wrench.

7.

Remove two nuts (H) and two lockwashers (J).

Throw lockwashers away.

8.

Lift fuel pump (K) along with two screws (G), flat

washer (L), and condenser bracket from mounting

place.

NOTE

Using chalk, mark direction each

elbow is pointing on body of fuel

pump.

9.

Using 1/2 inch wrench, remove elbow (M) from

pump (K).

10.

Using 7/16 inch wrench, remove elbow (N) from

pump (K).

Go on to Sheet 3

TA148143

7-68