TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 343 of 772

TM 9-2350-260-20-1-2

AIR CLEANER OUTLET HOSE REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Using screwdriver, loosen two clamps (A).

2.

Disconnect hose assembly (B) from outlet elbow

(C) of air cleaner and elbow (D) of turbocharger.

3.

Remove hose assembly (B).

4.

Using screwdriver, unscrew clamps (A) and (E)

and remove from hose assembly.

INSPECTION AND REPAIR:

1.

Inspect hose assembly (A) for damaged or

defective parts.

If hose or flange is unserviceable,

replace complete hose assembly (A).

If fingers (B)

or preformed packing (C) are defective, replace.

2.

Using punch and hammer, drive out pins (D) to

replace defective fingers (B).

3.

Position new finger (B) to hose assembly (A).

Using pliers, install pin (D) to secure finger (B) to

hose assembly.

Using hammer, tap pin (D) in.

4.

Throw defective preformed packing (C) away.

5.

Apply adhesive (Item 4, Appendix D) in groove of

flange of hose assembly (A) and install new

preformed packing (C).

Go on to Sheet 3

TA148149

7-74