TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 333 of 772
TM 9-2350-260-20-1-2
FUEL PUMP REPLACEMENT.
RIGHT FUEL TANK (Sheet 4 of 6)
INSTALLATION:
1.
Position packing (A) around pump (B), and using
hands install clamps (C) around packing (A) and
pump (B).
2.
Using screwdriver and 3/8 inch wrench, secure
ground lead (D) to fuel pump (B) with screw (E),
new lockwasher (F), and nut (G).
3.
Using 7/16 inch socket, secure clamp (H) to
bracket (J) with two screws (K) and two new
lockwashers (L).
4.
Position fuel pump (B) in mounting bracket (J) so
that pump discharge port (M) will be directly
beneath stamped lettering 'PUMP DISCHARGE
LOCATION' on access cover (N).
Lock pump in
bracket by closing clamp lever (P).
5.
Position new gasket (Q) on mounting bracket (J).
Apply sealing compound (Item 28, Appendix D) to
threads of one screw (R).
Install one screw (R)
through access cover (N) and new gasket (Q) into
mounting bracket (J).
Leave screw (R) loose.
Go on to Sheet 5
TA148139
7-64
Back to Top
