TM 9-2350-260-20-1-2
AIR CLEANER TURBOCHARGER ELBOW REPLACEMENT (Sheet 2 of 3}
REMOVAL:
1.
Using screwdriver, loosen two clamp (A) securing
hose (B) to turbocharger elbow (C).
2.
Remove hose (B).
3.
Using socket and wrench, remove eight nuts,
lockwashers, and fiat washers (D) securing elbow
(C) to turbocharger.
Throw lockwashers away.
4.
Remove elbow (C) and gasket (E).
Throw gasket
away.
5.
Make sure elbow (C) and turbocharger inlet mating
surfaces are not nicked, burred, or damaged.
Make sure eight nut and studs are not stripped or
damaged.
Go on to Sheet 3
TA148146
7-71