TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 351 of 772

TM 9-2350-260-20-1-2

AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-83

Installation

7-85

TOOLS:

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

5 in. extension with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

Flat-tip screwdriver

Putty knife

3/8 in. combination box and open end wrench

Universal joint with 1/2 in. drive

SUPPLIES:

Gasket (11591585) (2 required)

Gasket (8762871)

Gasket (10863870)

Adhesive (Item 2, Appendix D)

Rags

Lockwasher (MS35333-41) (4 required)

Lockwasher (MS35338-46) (14 required)

Screws (MS90725-32) (4 required) (Early M60 only)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURES:

Traverse turret so gun tube points over left or right side of tank (TM 9-2350-260-10)

Open top deck grille doors (TM 9-2350-260-10)

NOTE

Removal of left or right intake hose is

same.

Left side shown.

Go on to Sheet 2

TA148157

7-82