TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 353 of 772

TM 9-2350-260-20-1-2

AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 3 of 5)

13.

Using 9/16 inch socket and universal joint, remove

six nuts and lockwashers (K).

Throw lockwashers

away.

14.

Using wrench, loosen clamp nut (L) at end of

intake hose (B) and remove clamp (M).

15.

Remove hose (B) from flange (N).

16.

Separate intake (P) and screen (Q) with gaskets (R) from flange (N).

17.

Clean and inspect screen and gaskets.

If screen is damaged or defective, replace.

18.

If one or both gaskets (R) are damaged, scrape gaskets (R) from screen (Q).

Apply adhesive (Item 2, Appendix D)

to new gasket and position onto screen.

19.

Inspect and replace studs (S) in flange (N) as necessary.

Go on to Sheet 4

TA148159

7-84