TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 359 of 772

TM 9-2350-260-20-1-2

AIR CLEANER REPLACEMENT (SIDE LOADING) (Sheet 4 of 6)

12.

Using 9/16 inch socket and 10 inch extension,

remove six screws (W) and flat washers (X).

CAUTION

Be sure to guide electrical lead out of

hole in hull when removing air

cleaner.

13.

Using one person t operate hoist, have two people

guide air cleaner and lift it off tank.

14.

Remove air cleaner outlet elbow (page 7-76).

15.

Remove air cleaner inlet elbow (page 7-79).

INSTALLATION:

NOTE

Clean mounting area before installing air cleaner.

1.

Install air cleaner outlet elbow (page 7-77).

2.

Install air cleaner inlet elbow (page 7-81).

3.

Attach a two-point sling (A) to air cleaner (B) and

hoist C).

4.

Open grille doors (TM 9-2350-260-10).

5.

Attach lockwire (Item 59, Appendix D) to electrical

lead (D) of air cleaner.

Thread lockwire through

hole in hull and pull wire and electrical lead (D)

through hole as two people position air cleaner

onto mounting.

6.

Close grille doors after air cleaner is positioned.

Go on to Sheet 5

TA148165

7-90