TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 354 of 772

TM 9-2350-260-20-1-2

AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 4 of 5)

INSTALLATION:

1.

Position screen (A) with gaskets (B) over studs onto flange (C).

2.

Position intake (D) over studs onto flange (C).

3.

Install six nuts and new lockwashers (E) to secure

intake (D), screen (A), and flange (C).

Using 9/16

inch socket and universal joint, tighten nuts (E).

4.

Position hose (F) and clamp (G) onto flange (C),

and, using 3/8 inch wrench, tighten nut (H) on

clamp (G) securing hose (F) to flange (C).

5.

Position intake (D) and flange (C) assembly

(assembled in steps 1 through 4) with flange (C)

toward engine, over studs on bulkhead.

6.

Install eight new lockwashers and nuts (J) to

secure intake and flange assembly to bulkhead.

Using 9/16 inch socket, tighten nuts (J).

Go on to Sheet 5

TA148160

7-85