TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 453 of 772

TM 9-2350-260-20-1-2

FUEL TANK (LEFT AND RIGHT) DRAIN PLUG REPLACEMENT (Sheet 1 of 1)

TOOLS:

10 in. extension with 1/2 in. drive

Hinged handle with 1/2 in. drive

3/4 in. combination box and open end wrench

SUPPLIES:

Grease (Item 36, Appendix D)

Lockwasher (MS35338-67) (4 required)

PRELIMINARY PROCEDURE:

Drain fuel tanks (page 7-153)

REMOVAL:

1.

Using wrench, remove four screws (A) and lockwashers (B).

Hold access cover to keep from falling.

Throw

lockwashers away.

2.

Remove access cover (C) and gasket (D).

3.

Using extension and handle, remove drain plug (E).

INSPECTION:

Inspect fuel drain plug for stripped threads or damaged flats.

Throw unserviceable plug away.

INSTALLATION:

1.

Coat fuel drain plug threads with grease (Item 36,

Appendix D).

2.

Using extension and hinge handle, install fuel

drain plug (E).

3.

Install fuel drain access cover (C) and gasket (D).

Secure with four screws (A) and new lockwashers

(B).

4.

Using wrench, tighten four screws (A).

5.

Fill fuel tanks.

End of Task

TA148259

7-184