TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 445 of 772

TM 9-2350-260-20-1-2

FUEL TANK PLUG AND BRACKET REPLACEMENT (Sheet 1 of 3)

TOOLS:

Ratchet with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

1/2 in. combination box and open end wrench

3/4 in. socket with 1/2 in. drive

9/16 in. combination box and open end wrench

Stud remover

SUPPLIES:

Lockwasher (MS35338-45) (2 require

REFERENCE:

TM 9-2350-260-10

REMOVAL:

1.

Using 3/4 inch socket, loosen bolt (A) holding

doors (B).

Open three doors (B) to gain access to

left fuel tank.

2.

Using 1/2 inch socket, remove two screws (C),

washers (D), and lockwashers (E) holding

bracket

(F) to fuel tank (G).

Throw lockwashers away.

NOTE

If flats of plug (H) are badly rounded

or deformed, throw plug away.

3.

Using 9/16 inch wrench or stud remover, remove

plug (H) from fuel tank (G).

Go to Sheet 2

TA148251

7-176