TM 9-2350-260-20-1-2
FUEL TANKS (LEFT AND RIGHT) LEVEL GAGE TRANSMITTER REPLACEMENT (Sheet 3 of 4)
9.
Tilt transmitter (F).
Withdraw float arm (L) from
fuel tank opening (K).
10.
Using putty knife, remove gasket (M) from
transmitter (F).
Throw gasket away.
11.
Cover opening (K) with clean rags to keep dirt out
of fuel tank.
INSTALLATION:
NOTE
This procedure applies to both left
and right fuel transmitters unless
otherwise noted.
1.
Remove rags covering fuel tank opening (A).
2.
Slip new gasket (B) onto transmitter (C).
3.
Carefully work float (D) and float arm (E) into fuel
tank opening (A).
4.
Place gasket (B) in position on fuel tank opening
(A).
5.
Carefully lower transmitter (C) into position.
NOTE
Transmitter
mounting
holes
are
patterned so that transmitter can only
be installed with electrical connector
facing hull wall.
Go on to Sheet 4
TA148245
7-170