TM 9-2350-260-20-1-2
FUEL TANKS (LEFT AND RIGHT) LEVEL GAGE TRANSMITTER REPLACEMENT (Sheet 4 of 4)
6.
Using screwdriver, install five screws and washers
(F) securing transmitter (C) to fuel tank.
7.
Secure screws (F) with new lockwire (G) (Item 59,
Appendix D).
8.
Connect electrical connector (H) to transmitter (C).
9.
Check fuel gage for proper operation (TM 9-2350-
260-10).
10.
Place cover (J) in position over transmitter (C) and
install two screws and lockwashers (K) and (L).
11.
Position safety chain (M) on cover (J) and install
flat washer, new lockwasher, and screw (N).
12.
Using 1/2 inch socket, tighten three screws and new lockwashers (K), (L), and (N) securing cover (J) to fuel tank.
13.
Check fuel gage for proper operation (TM 9-2350-260-10).
14.
Close top deck grille doors (TM 9-2350-260-10).
End of Task
TA148246
7-171