TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 443 of 772

TM 9-2350-260-20-1-2

FUEL TANK (LEFT AND RIGHT) CONDENSATE RELIEF VALVE REPLACEMENT (Sheet 3 of 4)

CLEANING AND INSPECTION:

1.

Using dry cleaning solvent (Item 54, Appendix D), clean all components.

2.

Inspect components for cracks or breaks.

Replace unserviceable components.

3.

Using 6-inch ruler, check that free length of spring is one inch long or longer.

INSTALLATION:

1.

Position three ball bearings (A), new preformed packing (B), and spring (C) on pipe adapter (D).

2.

Press connector sleeve (E) down on pipe adapter

(D).

Using snap ring pliers, install retaining ring

(F).

3.

Remove rags from fuel tank.

4.

Using wrench, install pipe adapter (D) in fuel tank

(G).

5.

Press down on connector sleeve (E) and install

plug (H).

6.

Using slip joint pliers, install chain (J) on plug (H).

Go on to Sheet 4

TA148249

7-174