TM 9-2350-260-20-1-2
FUEL TANK CROSSOVER VALVE REPLACEMENT (Sheet 5 of 7)
NOTE
The following steps of valve installation will be performed through the butterfly
valve access in turret.
4.
Install remaining three screws (E) and washers (F) holding crossover valve (B) and preformed hose (C) to right fuel
tank (D).
5.
Install remaining three screws (H) and washers (J) holding preformed hose (C) to left fuel tank (G).
6.
Using 1/2 inch wrench, tighten three screws (E) and (H).
Go on to Sheet 6
TA148264
7-189