TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 464 of 772

TM 9-2350-260-20-1-2

FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (Sheet 4 of 9)

12.

Using 7/16 inch wrench and 7/16 inch socket with

extension, remove two nuts and lockwashers (P)

and two screws (Q).

Throw lockwashers away.

13.

Remove fuel shutoff valve from bracket (R).

14.

Using 1/2 inch socket with extension, remove two

screws (S), lockwashers (T), and flat washers (U)

holding bracket (R).

Throw lockwashers (T) away.

15.

Remove fuel shutoff valve and bracket (B) from

tank.

16.

Manually install fuel shutoff valve into vise.

17.

Using hammer and drive pin punch, start spring

pin (U) out of lever (D).

18.

Using pliers, remove spring pin (U) from lever (D).

Throw pin away.

19.

Manually remove lever (D) from fuel shutoff valve.

Go on to Sheet 5

TA148270

7-195