TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 465 of 772

TM 9-2350-260-20-1-2

FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (Sheet 5 of 9)

20.

Using 1-1/8 inch wrench, loosen nut (V) about 1/2

turn.

21.

Using adjustable wrench, remove elbow (W) with

nut (V), washer (X), and preformed packing (Y)

from fuel shutoff valve as an assembly.

22.

Manually remove preformed packing (Y) and washer (X) from elbow (W).

Throw preformed packing (Y) away.

23.

Using adjustable wrench to hold elbow (W), use 1-1/8 inch wrench to remove nut (V) from elbow (W).

CLEANING AND INSPECTION:

1.

Using wire brush, clean threads on two elbows.

2.

Inspect parts for damage.

Replace as necessary.

INSTALLATION:

1.

Manually install fuel shutoff valve into vise.

2.

Using sealing compound (Item 24, Appendix D),

lightly coat threads (A) on two elbows.

Go on to Sheet 6

TA148271

7-196