TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 457 of 772

TM 9-2350-280-20-1-2

FUEL TANK CROSSOVER VALVE REPLACEMENT (Sheet 4 of 7)

10.

Using dry cleaning solvent (Item 54, Appendix D), rags, and putty knife, clean excess material from fuel tank.

NOTE

The following steps of valve installation will be performed in engine compartment

INSTALLATION:

1.

Install new gasket (A), crossover valve (B), and preformed hose (C) to right fuel tank (D) using five screws (E) and

washers (F).

2.

Install preformed hose (C) to left fuel tank (G) using five screws (H) and washers (J).

3.

Using 1/2 inch wrench, tighten five screws (E) and five screws (H).

Go on to Sheet 5

TA148263

7-188