TM 9-2350-260-20-1-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 8 of 23)
Gage Illumination Indicator Light Replacement (Sheet 1 of 2)
TOOLS:
Cross-tip screwdriver
SUPPLIES:
Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE:
Remove instrument panel from tank (page 10-136)
NOTE
Removal and installation of both gage illumination indicator lights is the same.
REMOVAL:
1.
Remove lead (circuit 40) from rear of indicator light (A) by pulling out.
2.
Remove lens (B) by turning counterclockwise.
3.
Remove lamp (C) by pushing in and turning counterclockwise.
4.
Using screwdriver, remove two screws with
assembled washer (D) securing indicator light (A) to
panel.
5.
Remove indicator light (A).
Go on to Sheet 2
TA147179
10-147