TM 9-2350-260-20-1-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using spanner wrench, disconnect cable
connector (A) from receptacle on rear of
panel.
2.
Using 7/16 inch wrench and 7/16 inch socket,
remove three screws, lockwashers, and nuts
(B) (hidden) securing ground lead (C) hidden
to receptacle mounting bracket.
Throw
lockwashers away.
3.
Using 7/16 inch wrench, remove four screws and lockwashers (D) securing support assembly with instrument panel
cluster assembly (E) to hull.
Throw lockwashers away.
4.
Remove support assembly with instrument panel cluster assembly (E) from tank.
5.
Using cross-tip screwdriver and 11/32 inch
wrench, remove four screws, lockwashers (F),
and nuts (G) securing instrument panel cluster
assembly (H) to support assembly (J).
Throw
lockwashers away.
6.
Remove instrument panel cluster assembly (H)
from support assembly (J).
Go on to Sheet 3
TA147169
10-137