TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 70 of 71)
Master Control Panel Personnel Heater Wiring Harness Replacement (Sheet 3 of 4)
INSTALLATION:
1.
Using screwdriver, move screws and washers from terminals 2 through 6 of replacement hi-lo switch (A).
Retain
screws and washer for installation.
2.
Position electrical leads (B) to switch (A) as shown.
NOTE
Electrical leads (407 and 405) are part of indicator light (C).
3.
Using screwdriver, secure leads to terminals 2 through 6 with screws and washers removed in step 1.
Go on to Sheet 4
TA147164
10-132