TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 316 of 783

TM 9-2350-260-20-1-3

BATTERY TESTING AND REPLACEMENT (Sheet 5 of 13)

10. Readings between cells of any one battery must be within 0.025 of each other.

If they are not, replace battery.

REMOVAL:

1.

Locate three battery ground cable terminals (A).

2.

Using 1/2 inch box wrench on nut (B) and 1/2 inch

open end wrench on bolt (C), loosen nut (B) and bolt

(C) on three battery ground cable terminals (A).

CAUTION

As each cable is removed, cover

battery ground cable with rags and

position cable to prevent contact with

battery box or batteries to prevent

arcing.

3.

Using battery terminal puller, move three battery

ground terminals (A) from at post (D).

Lay terminals

and cables aside.

Go on to Sheet 6

TA147336

10-304