TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 322 of 783

TM 9-2350-260-20-1-3

BATTERY TESTING AND REPLACEMENT (Sheet 11 of 13)

3.

Install holddown retainer (D) using four bolts and

eight washers.

4.

Using 9/16 inch box wrench, tighten four bolts (E).

NOTE

Apply light coat of grease (Item 36,

Appendix D) to battery terminals.

5.

Install six terminal (F) to battery posts (J).

NOTE

Do not force terminals onto battery

posts.

6.

Using 1/2 inch box wrench on nuts (G) and 1/2 inch

open end wrench on bolts (H), tighten nuts (G) and

bolts (H) on six terminals (F) to battery posts (J).

7.

Position six rubber boot (K) over terminals (F).

Go on to Sheet 12

TA147342

10-310