TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 327 of 783

TM 9-2350-260-20-1-3

BATTERY JUMPER LEAD ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS:

1/2 in.

combination box and open end wrench

9/16 in.

combination box and open end wrench

Lifter-scraper, battery terminal

Slip joint pliers

SUPPLIES:

Grease (Item 36, Appendix D)

Lockwasher (MS45904-76) (12 required)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Disconnect three battery ground traps (page 10-294)

REMOVAL:

1.

Open turret platform access door (A).

2.

Traverse turret to expose battery jumper lead

assembly (B) (TM 9-2350-260-10).

NOTE

Removal procedures for both ends of

lead assembly are identical.

3.

Slide boot (C) back on lead assembly (B).

4.

Using 9/16 inch wrench, remove nut (D).

5.

Using 1/2 inch wrench, remove nut (E).

Go on to Sheet 2

TA147347

10-315