TM 9-2350-260-20-1-3
BATTERY TESTING AND REPLACEMENT (Sheet 12 of 13)
8.
Install three positive terminals (L) to battery posts
(M).
9.
Using 1/2 inch box wrench on nuts (N) and 1/2 inch
open end wrench on bolts (P), tighten nuts (N) and
bolts (P) on three terminals (L).
10. Position three rubber boot (Q) over three terminals
(L).
11. Install three negative terminals (R) to battery posts
(S).
12. Using 1/2 inch box wrench on nuts (T) and 1/2 inch
open end wrench on bolts (U), tighten nut (T) and
bolts (U) on three terminals (R) securing terminals
(R) to battery posts (S).
Go on to Sheet 13
TA147343
10-311