TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 328 of 783

TM 9-2350-260-20-1-3

BATTERY JUMPER LEAD ASSEMBLY REPLACEMENT (Sheet 2 of 3)

6.

Using pliers, pull lead (F) along with two screws, (G)

and washers (H) away from terminal (J).

7.

Remove two screws (G) and washers (H) from lead

(F).

Throw lockwashers away.

8.

Using lifter, remove terminal (J) from battery.

9.

Slide boot (K) down and off lead (F).

10. Remove other end of lead assembly (B) (steps 3

through 9).

INSTALLATION:

NOTE

Installation is identical for both ends

of lead assembly.

1.

Slide boot (A) on lead (B).

2.

Place terminal (C) on battery.

3.

Place lead (B) in position on terminal (C).

4.

Place two screws (D) and new lockwashers (E)

through lead (B) and terminal (C).

Go on to Sheet 3

TA147348

10-316