TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 337 of 783

TM 9-2350-260-20-1-3

ELECTRICAL WIRING HARNESS AND CABLE CONNECTOR REPAIR

Terminal Connector Repair (Sheet 2 of 2)

4.

Slide new heat-shrink tubing (D) onto and back

along cable (C).

5.

Slide new terminal (B) over stripped cable end (E)

and onto cable (C).

7.

Slide heat-shrink tubing (D) over crimps (F) and (G).

8.

Using heat gun, shrink tubing (D).

9.

Using multimeter, check continuity of repaired circuit.

10. Tighten or install cable clamps as required.

11. Connect three battery ground straps (page 10-294).

6.

Using crimping tool, crimp terminal (B) at (F) and

(G).

End of Task

TA147357

10-325