TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 420 of 783

TM 9-2350-260-20-1-3

CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, LEFT FUEL TANK (Sheet 5 of 6)

3

Position new gasket (H) and cover (B) onto fuel tank

and install 12 screws (K) and washers (L) securing

cover (B) to fuel tank.

4.

Using 1/2 inch socket and torque wrench, tighten

screws (K) to 50-60 lb-in (6-7 N

•

m).

5.

Using slip joint pliers, install lockwire (M) (Item 58,

Appendix D) into screws (K).

6.

Using screwdriver, secure electrical lead (N) of

housing and capacitor (P) to adapter (D) with

screw (Q) and new lockwasher (R).

7.

Position capacitor and housing (P) onto cover

(B) and, using screwdriver, install four screws

(S) and washers (T) securing capacitor and

housing (P) to cover (B).

8.

Using slip joint pliers, install lockwire (U) (Item

58, Appendix D) into screws (S).

Go on to Sheet 6

TA147440

10-408