TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 412 of 783

TM 9-2350-260-20-1-3

ENGINE GROUND LEAD ASSEMBLY REPLACEMENT (Sheet 2 of 5)

REMOVAL:

CAUTION

Make sure MASTER CONTROL switch is set to OFF before replacing engine

ground lead assembly.

1.

Reaching through upper engine access opening,

use socket to remove screw (A) and screw (B), each

with two lockwashers.

Throw lockwashers away.

NOTE

If ground lead connector is located at bottom of engine, do steps 2 through 4.

If

ground lead is located on top of engine, go to step 5.

2.

Reaching through engine access opening, use

spanner wrench to loosen ground connector (C).

3.

Manually remove ground connector (C) from engine

connector (D).

4.

Remove old engine ground lead from engine

compartment.

Go on to Sheet 3

TA147432

10-400