TM 9-2350-260-20-1-3
REAR INTERPHONE CABLE ASSEMBLY REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
1.
Connect end of cable assembly (A) at junction (B).
2.
Using spanner wrench, tighten cable assembly (A)
connector (C).
3.
Place new grommet (D) around cable assembly (A).
4.
Apply silicone compound (Item 32, Appendix D) to
grommet D).
5.
Install grommet (D) in cavity of hull wall.
6.
Place clamp (E) around cable assembly (A).
7.
Using 7/16 inch wrench, install screw and new lockwasher (F) securing clamp (E) and cable assembly (A) to hull.
Go on to Sheet 4
TA147427
10-395