TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 398 of 783

TM 9-2350-260-20-1-3

TRANSMISSION WIRING HARNESS REPLACEMENT (Sheet 1 of 7)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-386

Installation

10-389

TOOLS:

3/4 in.

combination box and open end wrench

7/16 in.

combination box and open end wrench (2 required)

Slip joint pliers

9/16 in.

socket with 1/2 in.

drive

Ratchet with 1/2 in.

drive

Flat-tip screwdriver

Spanner wrench

3/4 in.

socket with 1/2 in.

drive

SUPPLIES:

Identification tags

Grommet

Lockwasher (MS35338-42)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-1)

REMOVAL:

NOTE

Perform steps 1 through 9 of transmission is mated to a 2D engine.

Perform steps 1, 2, and 3, and 10 through 14 if transmission is mated to a 2A

engine.

1.

Locate and tag six connections (male and

female (A) through (F) for identification.

2.

Using hands, unplug connections (A) through

(E).

3.

Using pliers, disconnect connector (F).

Go on to Sheet 2

TA147418

10-386