TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 391 of 783

TM 9-2350-260-20-1-3

ENGINE STARTER WIRING HARNESS REPLACEMENT (2A ENGINE) (Sheet 4 of 4)

7.

Using flat-tip screwdriver, install small cable

(K) onto bottom front mount of relay solenoid

(L) with screw and external tooth lockwasher

(M).

8.

Install small cable (N) and two ends (P) and

(Q) of cable (B) onto lower terminal of starter

relay solenoid (L) with nut and two new

lockwashers (R).

Using 3/4 inch socket on nut

and two lockwashers (R), tighten nut.

9.

Install ground strap (S), two ends (T) and (U)

of cable (C), and small cable (V) onto terminal

on starter motor (W) with nut and two new

lockwashers (X).

Using 3/4 inch socket on nut

and lockwashers (X), tighten nut.

10. Coat all exposed connections with glyptol

(Item 38, Appendix D).

11. Install powerplant (page 5-14).

End of Task

TA147411

10-379