TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 384 of 783

TM 9-2350-260-20-1-3

GENERATOR ELECTRICAL LEADS REPLACEMENT (2D ENGINE)(Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-372

Installation

10-374

TOOLS:

Flat-tip screwdriver

5 in. extension with 1/2 in. drive

3/8 in. combination box and open end wrench

1/2 in. socket with 1/2 in. drive

9/16 in. combination box and open end wrench

9/16 in. socket with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

Pocketknife

Ratchet with 1/2 in. drive

SUPPLIES:

Lockwasher (MS35338-42)(4 required)

Lockwasher (MS35338-44)(11 required)

Self-locking nut (503354)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-27)

REMOVAL:

1.

Using flat-tip screwdriver and 3/8 inch wrench,

remove four screws, lockwashers, and nuts (A).

Throw lockwashers away.

2.

Remove electrical lead (B) from mounting bracket

(C).

3.

Remove four clamps (F) from engine.

4.

Using 7/16 inch socket, remove eight screws (D) and

lockwasher (E) securing four clamps (F).

Throw

lockwashers away.

Go on to Sheet 2

TA147404

10-372