TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 405 of 783

TM 9-2350-260-20-1-3

REAR INTERPHONE CABLE ASSEMBLY REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-393

Installation

10-395

TOOLS:

Flat-tip screwdriver

Slip joint pliers

Adjustable spanner wrench

7/16 in. combination box and open end wrench

1 in. combination box and open end wrench

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Lockwasher (MS35338-44) (8 required)

PRELIMINARY PROCEDURE:

Disconnect phone connector from rear connector (TM 9-2350-260-10)

REMOVAL:

1.

Using screwdriver, remove four screws (A),

lockwashers (B), and nuts (C) securing connector

(D) to interphone box (E).

Throw lockwashers away.

2.

Using 7/16 inch wrench, remove two screws (F),

lockwashers (G), nuts (H), and clamps (J) securing

cable assembly to shield (K).

Throw lockwashers

away.

3.

Using 7/16 inch wrench, remove one screw (F),

lockwasher (G), nut (H), and clamp (J) which is

mounted on outside of hull (hidden).

Throw

lockwashers away.

Go on to Sheet 2

TA147425

10-393