TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 413 of 783

TM 9-2350-260-20-1-3

ENGINE GROUND LEAD ASSEMBLY REPLACEMENT (Sheet 3 of 5)

5.

Manually traverse turret 90 degrees over left or right sponson box (TM 9-2350-260-10).

6.

Open upper grille doors (TM 9-2350-260-10).

7.

Using spanner wrench, loosen ground connector (E)

from engine connector (F).

8.

Manually remove ground connector (E) from engine.

9.

Remove old engine ground lead from engine

compartment.

INSTALLATION:

1.

Position new engine ground lead assembly inside

engine compartment.

2.

Reaching through engine access opening using wire

brush to scrape ground lead assembly connect point

(A) until free from paint, rust, and corrosion.

Go on to Sheet

TA147433

10-401