TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 422 of 783

TM 9-2350-260-20-1-3

CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, RIGHT FUEL TANK (Sheet 1 of 9)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-410

Cleaning and Inspection

10-414

Installation

10-415

TOOLS:

Offset flat-tip screwdriver with 2 in.

blade

Flat-tip screwdriver with 6 in. blade

Diagonal cutting pliers

Slip joint pliers

Putty knife

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

9/16 in. socket with 1/2 in. dive

SUPPLIES:

Gasket (10870952)

Lockwire (Item 58, Appendix D)

Gasket (10864012) (2 required)

Rags Dry cleaning solvent (Item 54, Appendix D)

Sealing compound (Item 21, Appendix D)

Silicone compound (Item 32, Appendix D)

Gasket (10864181)

Gasket (8722328)

Lockwasher (MS35338-38)

Lockwasher (MS35338-43) (4 required)

Gasket (10873918)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURES:Isolate right fuel tank (TM 9-2350-260-10)

Drain right fuel tank (page 7-153)

REMOVAL:

1.

Open

turret

platform

access

door

(A)

(TM 9-2350-260-10).

2.

Traverse turret get at access cover (B) in subfloor

over right fuel tank (TM 9-2350-260-10).

3.

Using offset flat-tip screwdriver, remove 14 screws

securing access cover (B).

Remove access cover

and gasket (B).

Throw gasket away.

Go on to Sheet 2

TA147442

10-410