TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 431 of 783

TM 9-2350-260-20-1-3

CAPACITOR AND HOUSING ASSEMBLY REPAIR (Sheet 1 of 1]

TOOLS:

Flat-tip screwdriver

SUPPLIES:

Gasket (7412721)

PRELIMINARY PROCEDURES: Remove left fuel tank capacitor and housing assembly

(page 10-404) (as required)

Remove right fuel tank capacitor and housing assembly

(page 10-410) (as required)

DISASSEMBLY:

1.

Using screwdriver, remove four screws (A) and

washers (B) holding capacitor and connector

assembly (C) to housing (D).

2.

Separate capacitor and connector assembly (C)

from housing (D).

3.

Remove gasket (E).

Throw gasket (E) away.

ASSEMBLY:

1.

Position new gasket (E) onto housing (D).

Secure connector (C) to housing using four screws (A) and washers (B).

2.

Using screwdriver, tighten four screws (A).

3.

Install left fuel tank capacitor and housing assembly (page 10-407) or install right fuel tank capacitor and housing

assembly (page 10-415).

TA147451

10-419/(10-420 blank)