TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 440 of 783

TM 9-2350-260-20-1-3

SHIFT LINKAGE ADJUSTMENT (Sheet 8 of 20)

43. Go to right rear of tank and try to insert locating pin

into alignment hole (C) and through clevis (AB).

If

locating pin can be inserted, shift linkage is in

adjustment.

Remove locating pin and go to step

129.

If locating pin cannot be inserted, go on to step

44.

44. Displace right hull ammo rack (page 17-15).

45. Try to insert locating pin into alignment hole (AC).

If

locating pin can be inserted, remove locating pin and

go to step 73.

If locating pin cannot be inserted, go

on to step 46.

46. Using 9/16 inch wrench, loosen jamnuts (AD) and

(AE).

47. Using 9/16 inch wrench, remove screw (AF) and

remove shifting rod bearing end (AG) from clevis

(AH).

48. Manually move clevis (AH) and insert locating pin

Into alignment hole (AC).

Go on to Sheet 9

TA146563

11-9