TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 443 of 783

TM 9-2350-260-20-1-3

SHIFT LINKAGE ADJUSTMENT (Sheet 11 of 20)

68. Using 9/16 inch wrench, adjust shifting rod baring

end (AG) by turning clockwise or counterclockwise

until crew (AF) will drop freely through clevis (AH)

and shifting rod bearing end (AG).

69. Using 9/16 inch wrench, install screw (AF).

70. Using 9/16 inch wrench, tighten jamnut (AD).

71. Remove locating pin from alignment hole (AC).

72. Using 9/16 inch socket and torque wrench, tighten

screw (A) to 15-20 lb-ft (20-27 N

•

m).

73. Go to right rear of tank and try to insert locating pin into alignment hole (C) and through clevis (AB).

If locating pin can

be inserted, shift linkage is in adjustment.

Remove locating pin and go to step 129.

If locating pin cannot be inserted,

go on step 74.

74. Remove powerplant (page 5-1).

Go on to Sheet 12

TA146566

11-12