TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 434 of 783

TM 9-2350-260-20-1-3

SHIFT LINKAGE ADJUSTMENT (Sheet 2 of 20)

ADJUSTMENT:

1.

Try to move transmission shift lever (A) to P position

(B).

If transmission shift lever cannot be moved to P

position, go to step 4.

If transmission shift lever can

be moved to P position, go on to step 2.

3.

At top of transmission, check position of shifting

position indicator (D).

If shifting position indicator

(D) is pointing to most forward dot (E), notify support

maintenance.

If shifting position indicator (D) is not

pointing to most forward dot, go to step 130.

4.

At top of transmission, using 9/16 inch wrench,

remove screw (F) and remove shifting rod bearing

end (G) from clevis (H).

5.

At driver's station, move transmission shift lever (A)

to P position.

2.

Go to right rear of tank and try to insert locating pin

into alignment hole (C).

If locating pin cannot be

inserted, go to step 7.

If locating pin can be

inserted, remove locating pin and go on to step 3.

Go on to Sheet 3

TA146557

11-3