TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 430 of 783

TM 9-2350-260-20-1-3

CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT.

RIGHT FUEL TANK (Sheet 9 of 9)

20. Position access cover (AE) over fuel tank opening

so that lettering FRONT OF VEHICLE stamped on

cover is facing toward front of tank.

21. Using 1/2 inch socket, install 12 screws and 12

washers (AJ) securing cover (AE).

22. Using

torque

wrench,

tighten

screws

and

lockwashers (AJ) to 10-15 lb-ft (14-20 N

•

m).

23. Using slip joint pliers, secure screws with lockwire

(AK) (Item 58, Appendix D).

24. Using offset flat-tip screwdriver, install 14 screws

(AL) securing access cover and new gasket (AM).

25. Open fuel tank crossover valve (TM 9-2350-260-10).

26. Fill fuel tank.

End of Task

TA147450

10-418