TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 451 of 783

TM 9-2350-260-20-1-3

SHIFT LINKAGE ADJUSTMENT (Sheet 19 of 20)

145.

Using 9/16 inch wrench, adjust shifting rod bearing

end

(BW)

by

turning

clockwise

or

counterclockwise until screw (BV) will drop freely

through clevis (BX) and shifting rod bearing end

(BW).

146.

Using 9/16 inch wrench, install screw (BV) through

clevis (BX) and shifting rod bearing end (BW).

147.

Using 9/16 inch wrench, tighten jamnut (BU).

148.

Remove locating pin from alinement hole (C).

149.

Using 9/16 inch socket and torque wrench, tighten screw (BV) to 1520 lb-ft (20-27 N

•

m) and go on to step 160.

150.

Using 9/16 inch wrench, remove screw (BV) and remove shifting rod bearing end (BW) from clevis (BX).

151.

Using 9/16 inch wrench, adjust shifting rod bearing end (BW) by turning clockwise until shifting rod (BQ) is past hole

(BS).

152.

Using 9/16 inch wrench, install screw (BV) through clevis (BX) and shifting rod bearing end (BW).

153.

Using 9/16 inch wrench, tighten jamnut (BU).

154.

Using 9/16 inch socket and torque wrench, tighten screw (BV) to 15-20 lb-ft (20-27 N

•

m).

Go on to Sheet 20

TA146574

11-20