TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 458 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL BASE ASSEMBLY REPAIR AND REPLACEMENT (Sheet 3 of 6)

8.

Using hammer and punch, drive pin (N) from link (J)

and shaft (G).

Remove link (J) from shaft (G).

9.

Using 1/2 inch socket, remove three screws (P) and

lockwashers (Q).

Separate base (E) from guide (F).

Throw lockwashers away.

10. Secure base (E) in vise.

11. Using hammer and punch, remove pin (R) from pivot (K) and shaft (G).

12. Using hammer and drift, remove shaft (G) and bearing (S) from base (E) and pivot (H).

Throw bearing away.

13. Remove parking brake actuator pin (T) from base (E).

14. Remove base (E) from vise.

15. Secure pivot (H) in vise.

16. Using hammer and chisel, remove stakes from pivot (H) that secures adjuster (U).

17. Using screwdriver, remove adjuster (U), spring (V), and plunger (W) from pivot (K).

18. Remove pivot (H) from vise.

TA146581

Go on to Sheet 4

11-27