TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 465 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL BRACKET ASSEMBLY AND CONNECTING LINK REPLACEMENT (Sheet 1 of 2)

TOOLS:

Ratchet with 1/2 in. drive

3/4 in. socket with 1/2 in. drive

2 in. extension with 1/2 in. drive

3/4 in. combination box and open end wrench (2 required)

7/16 in. combination box and open end wrench

SUPPLIES:

Lockwasher (MS35338-48)(2 required)

Lockwasher (MS35338-67)(2 required)

PRELIMINARY PROCEDURE:

Remove shifting control rod (page 11-37)

REMOVAL:

1.

Using 7/16 inch wrench, remove screw (A).

2.

Remove link (B) from bracket (C) by pulling down

from bottom.

3.

Using 3/4 inch socket, remove two screws (D) and

lockwashers (E).

Throw lockwashers away.

Go on to Sheet 2

TA146588

11-34