TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 455 of 783

TM 9-2350-260-20-1-3

NEUTRAL SHIFT SWITCH ADJUSTMENT (Sheet 3 of 3)

7.

Lengthen screw (D) until meter just reds zero.

8.

Lengthen screw (D) by three complete turns.

9.

Using two wrenches, tighten jamnut (C) toward

bracket (E) while holding screw (D).

10. Sit transmission lever to other positions, meter

should read zero in neutral (N) and park (P) only.

Replace neutral shift switch (page 10-282) if any

other readings are found.

11. Disconnect meter probes from electrical connectors.

12. Connect connectors (A) and (B) to (C) and (D).

13. Test adjustment by attempting to start engine in all

transmission lever positions.

Engine should start

only in neutral (N) and park (P) positions.

14. Install transmission shroud (page 9-23).

End of Task

TA146578

11-24