TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 500 of 783

TM 9-2350-260-20-1-3

TRANSMISSION SIDE OIL STRAINER ASSEMBLY SERVICE (Sheet 4 of 8)

11. Using adjustable wrench, remove nut (K) and nipple

adapter (L) from transmission.

12. Remove vent tube (M) from transmission.

13. Using hose clamp pliers, remove both clamps (A)

and rubber tubing (B) from vent tube (M).

14. Slide nut (K) off opposite end of vent tube (M).

DISASSEMBLY:

1.

Using diagonal pliers, cut lockwire (A) from six

screws (B).

2.

Using 7/16 inch socket, remove six screws (B) and

washer seals (C) securing element cover (D) to oil

screen shell (E).

Throw seals away.

3.

Using putty knife, remove cover (D) and gasket (F).

Throw gasket away.

4.

Remove preformed packing (G), reinforcement (H),

and element (J) from shell (E).

Separate

reinforcement from shell.

Throw packing away.

CLEANING AND INSPECTION:

1.

Using dry cleaning solvent (Item 54, Appendix D)

and rags, clean all parts.

2.

Inspect all parts for defects.

3.

Replace parts found defective.

Go on to Sheet 5

TA146623

11-69