TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 490 of 783

TM 9-2350-260-20-1-3

TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 1 of 7)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

11-59

Cleaning and Inspection

11-62

Installation

11-63

TOOLS:

9/16 in.

socket with 1/2 in.

drive

Diagonal cutting pliers

7/16 in.

socket with 1/2 in.

drive

Putty knife

5 in.

extension with 1/2 in.

drive

Slip joint pliers

1 in.

open end wrench

Retaining ring pliers

Torque wrench with 1/2 in.

drive

Ratchet with 1/2 in.

drive

Flat-tip screwdriver

SUPPLIES:

Gasket (7707232)

Transmission oil

Rags (Item 65, Appendix D)

Dry cleaning solvent (Item 54, Appendix D)

Lockwire (Item 60, Appendix D)

1/4 in.

x 20 NF x 3 in.

long screws (jackscrews)(2 required)

Lockwasher (MS35338-8 (10 required)

PRELIMINARY PROCEDURES:Remove top deck (page 16-20)

Remove transmission shroud (page 9-20)

REMOVAL:

NOTE

Some filter assemblies are secured with nuts and threaded studs instead of bolts

and lockwashers.

1.

Using 9/16 inch socket, remove 10 bolts (A) and lockwashers (B) holding filter assembly (C) to front of transmission.

Throw lockwashers away.

Go on to Sheet 2

TA146613

11-59