TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 484 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL SEAL ASSEMBLY REPLACEMENT AND REPAIR (Sheet 1 of 2)

TOOLS:

7/16 in. combination box and open end wrench

7/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES: Lockwashers (MS35338-63) (2 required)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-1)

REMOVAL:

1.

Using socket and 7/16 inch wrench, remove two screws (A) and lockwashers (B).

2.

Remove seal (C).

INSPECTION:

Inspect seal for damage and wear.

Replace as required.

Go on to Sheet 2

TA146607

11-53