TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 478 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR (Sheet 4 of 9)

10. Using 9/16 inch wrench, remove bolt (N).

11. Using 9/16 inch socket, extension, and 9/16 inch

wrench, remove three screws (P) and lockwashers

(Q) securing bracket assembly (R) to hull.

12. Remove bracket assembly (R) and shield (S) from

hull wall.

DISASSEMBLY:

1.

Using 9/16 inch socket, remove bolts (A) and (B).

2.

Remove stud and rod end bearing assembly (C)

from clevises (D) and (E).

3.

Inspect rod end bearings (F).

Replace if required.

4.

Inspect stud (G) for cracks or bends.

Replace if

required.

NOTE

If replacement of parts on stud and

rod end bearing assembly (C) is

required, perform steps 5 through 7.

TA146601

Go on to Sheet 5

11-47