TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 481 of 783

TM 9-2350-260-20-1-3

SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR

(Sheet 7 of 9)

ASSEMBLY:

NOTE

Position bracket (E) into vise as

necessary to accomplish assembly.

1.

Assemble connecting link (A) and spacer (B).

2.

Position two washers (C) on assembled link (D).

3.

Carefully position washers (C) and assembled link

(D) in bracket (E), making sure longer end of

connecting link is inserted through bracket.

4.

Position shaft (F) through bracket (E), washers (C),

and assembled link (D), with shouldered end

downward.

5.

Using 1/8 inch allen wrench, install setscrew and

jamnut (G) into bracket (E), with setscrew holding

shaft (F) in bracket.

Using 7/16 inch wrench and

allen wrench, lock screw.

6.

Using 5/16 inch wrench, install grease fitting (H).

7.

Position link assembly (J) on bracket (E).

8.

Using 3/4 inch wrench, install nut (K) on link

assembly (J).

Go on to Sheet 8

TA146604

11-50