TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 488 of 783

TM 9-2350-260-20-1-3

SERVOBANDS ADJUSTMENT (Sheet 3 of 4)

3.

Using torque wrench and 1-1/16 inch socket on adjusting nut (C), torque adjusting nut to 150 lb-ft (203 N

•

m).

4.

Back off adjusting nut (C) approximately one full turn to nearest flat that will aline lock plate (B) with adjusting nut

when lock plate is installed.

5.

Scribe mark on adjusting nut (C) and transmission

case (E) to record alined position.

Go on to Sheet 4

TA146611

11-57